Vehicles
Sections
36 not categorized PORSCHE 944S FACTORY OPTIONSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 914 1970-76 (includes uncategorized and accessory items) BES99115000SKR + 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 18 lb. (8.5 kg)weight savings over OEM center muffler. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - replaces OEM center muffler and connects to OEM header and OEM side mufflers and OEM tips. Please note: this muffler is a direct replacement the 991 Carrera s (3.8l - us model) which comes standard with valves. It is also a direct replacement for the Porsche sport exhaust option. This center muffler bypass for the 991 is one of the most technically advanced for Porsche t...(choose a part on the right to read more)
$3,713.60
Make a selection FVD123020ATK Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection FVD20799601 Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. This oil pan spacer provides a simple solution. This spacer increases sump capacity by half a liter, providing more reserve to ward off starvation. Thisoil pan spacer clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. *oil pan and sump baffle are OEM parts and do not need to be purchased material: 6061 t6 aluminum alloy finish: clear anodized weight: n/a models: Boxster, Boxster s, and 996 models (excludes GT3 and turbocharged models) installation: for best...(choose a part on the right to read more)
$283.80
Make a selection BBI9978200001 The bbi autosport Porsche 996 & 997 streetcup roll bar features a 2-piece design and 4130 chrome moly steel tubing (1.5" x .120" main hoop & 1.5" x 0.95" rear hoops) for excellent strength to weight ratio. Taking a sensible design approach, the 2-piece construction allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory bose subwoofers. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes "x" braces on both front and rear sections and each joint has been meticulously tig welded by hand. Bolt-in installation is accomplished by usin...(choose a part on the right to read more)
$2,395.00
Make a selection HEI993001005A Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: bolt-in bar aluminum 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Aluminum finish. Primarily for street use as a harness bar is not an option. Please note: these bars are hand made to order. They typically take between...(choose a part on the right to read more)
$1,401.40
Make a selection FVD95761890MG Factory: engine - v8 twin-turbo capacity - 4806ccm compression ratio - 10,5:1 max. Power - 368kw (500hp) @ 6000rpm max. Torque - 700nm (516 lbf ft) @ 2250-4500rpm max. Speed - 275km/h max. Rpm - 6500rpm acceleration 0-100km/h - 5.1s tuning:* max. Power - 397kw (540hp) @ 6000rpm max. Torque - 780nm (575 lbf ft) @ 3500rpm max. Speed - 280km/h max. Rpm - 6700rpm acceleration 0-100km/h - 5.0s * only with sport exhaust system and sport air filter for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, ...(choose a part on the right to read more)
$1,094.50
Make a selection SP100 After years of use all factory 914 coil springs sag. Look for three inches of tire to show between the wheel and the fender lip to ascertain if the springs are sagging or not. (also look for adjustible spring plates. Optionally installed they may have been set too low) 100 lb springs are the choice for all street and hot street driving applications. heavier than the stock originals, they will also cause the 914 to turn in better. we recommend these springs specifically for 914-6 and six-conversion cars. Sold as a pair. General Fitment914 1970-76
$156.00
Make a selection PILOTSET Pilot lights are a high quality replacement for the factory optionally installed driving fog lights on all 70-74 914s
$99.00
Make a selection 91436101500 Factory used mahle alloy wheel, optional equipment on all 73 2.0 and 74-76 914 models. the mahle is a painted cast alloy so you can easily refinish with some of our wurth or winzer German silver wheel paint View/Change Diagram
From $425.00
Make a selection 100555993SC1 Since 1984, we have established an extensive network of interior specialty vendors that have stockpiled historically correct materials and have the skills necessary to reproduce to o.e. Specifications. Each carpet set is produced in Germany and includes every concours quality detail. Features: genuine German fine velour original fitment jute/rubber backing for floor carpets vinyl bound edges for floor carpets all necessary cut outs and buttons manufactured in Germany sold as a complete set. 1 necessary per car. Please note: when ordering, please indicate the year, model, transmission, with/without factory air conditioning, if the car has full factory leather or a sound package. To customize this set with option...(choose a part on the right to read more)
$1,756.70
Make a selection 100555100SC3BL Since 1984, we have established an extensive network of interior specialty vendors that have stockpiled historically correct materials and have the skills necessary to reproduce to o.e. Specifications. Each carpet set is produced in Germany and includes every concours quality detail. Features: genuine German sliverknit velour - wool carpet thick / plush historically correct drivers side includes original script in gold original fitment jute/rubber backing for floor carpets heel padding vinyl bound edges for floor carpets all necessary cut outs and buttons manufactured in Germany sold as a complete set. 1 necessary per car. Please note: when ordering, please indicate the year, model, transmission, with/without f...(choose a part on the right to read more)
$1,656.60
Make a selection HEI964001002A Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: includes mounting plates that must be welded in. Aluminum 1.5-inch diameter tubing, .098 wall thickness tubing. Bars which connect to the main hoop, use a connecting joint system. Retains full seat adjustability. Aluminum finish. Primarily for street use as a harness bar is not an option. Pleas...(choose a part on the right to read more)
$933.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |